When you develop a project that is going to have many identical installations. You need to create a masterfile to work smarter. A masterfile alows you to duplicate the parameters and settings of an installation to others identical installations.
Step 1: Set up the first system
You need to configure the first system manually (rcc). This system will be the template. Run all the possible tests to make sure the system works as expected. Now you need to create a Masterfile.
Step 2: System Back Up (Including Masterfile)
By default, the system stores a daily log file on the SD card of the rcc and/or xcom device. However, in order to have a complete system backup, including the log files, the current configuration parameters and the system messages, the function “Save all files (system backup)” should be activated. Please go to rcc settings and follow the next steps:
Please bear in mind that this function could take up to 15 minutes in a system with 9 xtenders.
Once the backup is finished, please take out the SD card from the rcc 02 console. Then you can copy all the files and folders in the SD card using a computer.
Please re-insert the SD card in the rcc 02 console when the process is finalized.
Step 3: Copy Masterfile to other systems
Please bear in mind that this function could take up to 15 minutes in a system with 9 xtenders.
Step 4: Verify configuration
Select a parameter that should have been modified in this process. Enter in rcc, locate this parameter, and check the value. In case the parameter value is not correct, repeat Step 2.