Products from the aj inverter series
aj 2100-2400, simple and straightforward solution for standalone applications
high-end Swiss-made inverter
- This picture depicts a standalone application for water pumping powered by the aj 2400.
aj, Swiss simplicity and durability for your energy needs
The aj series pure sine wave inverters convert battery voltage into high-quality 230/120Vac which can be used for all electrical appliances. Designed to meet industrial and domestic needs, the aj is the optimal solution for standalone applications, fulfilling the highest requirements in terms of comfort, safety and reliability. Manufactured since 1998 in Switzerland with a 10-year warranty and delivered with AC and battery cables, the aj is a true “plug and forget solution”.
aj, Swiss simplicity and durability for your energy needs
The aj series pure sine wave inverters convert battery voltage into high-quality 230/120Vac which can be used for all electrical appliances. Designed to meet industrial and domestic needs, the aj is the optimal solution for standalone applications, fulfilling the highest requirements in terms of comfort, safety and reliability. Manufactured since 1998 in Switzerland with a 10-year warranty and delivered with AC and battery cables, the aj is a true “plug and forget solution”.
High overload capabilities
> 2 times the nominal power
Plug and play
Supplied with battery and AC cables, ready to power your application
10 years warranty
Optional integrated solar charger
The aj models can be equipped with an integrated PWM controller for an all-in-one solar system.
High overload capabilities
> 2 times the nominal power
Plug and play
Supplied with battery and AC cables, ready to power your application
10 years warranty
Optional integrated solar charger
The aj models can be equipped with an integrated PWM controller for an all-in-one solar system.
Designed for a wide range of uses
Flexibility of use for your applications
offgrid application
solar home systems
mobile application
on board power
What customers think of aj 2100-2400
“Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.”
“Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.”
“Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.”
Lorem ipsum dolor
“Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.”
Lorem ipsum dolor
Swiss made 
Proudly designed, assembled, and tested in Switzerland, ensuring the highest standards of quality and reliability that Studer Innotec is known for.
Every unit undergoes strict controls to ensure performance, long-term durability, and seamless operation in the most demanding environments.
With Swiss made excellence, you can trust the aj to deliver reliability for years to come.
Swiss made
Swiss made
Proudly designed, assembled, and tested in Switzerland, ensuring the highest standards of quality and reliability that Studer Innotec is known for.
Every unit undergoes strict controls to ensure performance, long-term durability, and seamless operation in the most demanding environments.
With Swiss made excellence, you can trust the aj to deliver reliability for years to come.
Digital regulation and control by microprocessor
A whole range with plenty of options
The aj series covers a complete range of sine wave inverters, from 800 VA to 2400 VA solutions for offgrid applications and battery voltages 12 and 24 V.
Rugged, efficient and easy to use with the option of adding an integrated PWM regulator. Every aj inverter is built to deliver reliable energy in all conditions.
Ideally suited for rural electrification and recognised by NGOs for this purpose
The aj inverter is recognised and used by NGOs and governments, such as USAID, the Ministry of Health/Education of Uganda, the Ministry of Electricity and Renewable Energy of Peru, the European Commission’s Directorate-General for Development and Cooperation – EuropeAid.
With more than 25 years on the market, it is known for its reliability in the field of rural electrification.
Adjustable standby level for lower power consumption
In offgrid every watt counts. The standby is an energy saving system which turns off the inverter intermittently when no consumer is detected. (adjustable detection value from 1 to 20W)
Worldwide compatibility
The entire aj series is compatible with 230V/50Hz and 120V/60Hz.
Battery compatibility
The aj is compatible with all 12/24/48 V (depending on the model chosen) lead/AGM battery and equivalent chemistries.
Thanks to precise charge control and advanced management algorithms, your batteries operate efficiently, reliably, and for the long run.
Adaptative management of batteries
With more than 3 decades of expertise in offgrid energy management, we have perfected battery optimisation to ensure a long-lasting performance. The aj features our Battery Lifetime Optimizer (BLO), which intelligently adapts charge cycles to preserve battery health and extend its lifespan.
Options & accessories
version s
integrated solar charger
version 01
AC out 120Vac & 60Hz
version 02
AC out 120Vac & 50Hz
version 03
AC out 220Vac & 60Hz
jt8
remote control
Options & accessories
version s
integrated solar charger
version 01
AC out 120Vac & 60Hz
version 02
AC out 120Vac & 50Hz
version 03
AC out 220Vac & 60Hz
jt8
remote control
Technical specifications
aj 2100-2400 inverters
In case of technical data change, this bloc below needs to update, it is use for mobile display of technical data
Inverter
| Nominal battery voltage (Input range) | 12 Vdc (10.5 – 16 Vdc) |
| Power 30 min. 25°C | 2100 VA |
| Continuous power 25°C | 2000 VA |
| Power 5 min. 25°C | 2450 VA |
| Power 5 sec. 25°C | 5000 VA |
| Asymmetric load | 1000 VA |
| Max. efficiency (%) | 92% |
| Cos φ max. | 0.1 – 1 up to 2000 VA |
| Detection of the load | Adjustable: 1 to 20 W |
| Short-circuit current AC 2 sec. | 26 Aac (52 Aac*) |
| Output voltage | Sine wave 230 Vac (120 Vac*) ±5 % |
| Frequency | 50 Hz (60 Hz*) ± 0.05 % (crystal controlled) |
| Consumption Stand-by / ON no load | 0.7 W/ 16 W |
| Reverse polarity protection as internal fuse | Not protected |
General data
| Weight | 19 kg |
| Dimensions h/w/l [mm] | 273/399/117 mm |
| Conformity | low voltage directive (LVD) 2014/35/EU: EN/IEC 62109-1, 62109-2, 62477-1, electromagnetic compliance (EMC) directive 2014/30/EU: EN/IEC 61000-3-3, 61000-6-2, 61000-6-4, 62040-2 |
Ingress protection of enclosures IP30 | Operating temperature range -20 to 50°C | Relative humidity 95 % (non condensing) | Ventilation forced from 45°C ± 5°C | Length cables (battery/AC out) 1.2 m / 1 m | Acoustic level < 45 dB (with ventilation) | Approximate correction of Pnom -1.5% / °C from + 25°C | Recommended battery capacity > 5 x Pnom/Unom (recommended value in Ah)
Options
| Solar regulator | Voltage max. 25 Vdc |
| Current max. 30 Adc | |
| Principle: Floating 3 stages (I/U/UO) | |
| Absorption voltage: 14.4 Vdc | |
| Floating voltage: 13.6 Vdc | |
| Input for the remote control jt8 (jt8 not included) | ✔ |
Inverter
| Nominal battery voltage (Input range) | 24 Vdc (21 – 32 Vdc) |
| Power 30 min. 25°C | 2400 VA |
| Continuous power 25°C | 2000 VA |
| Power 5 min. 25°C | 2800 VA |
| Power 5 sec. 25°C | 5200 VA |
| Asymmetric load | 1200 VA |
| Max. efficiency (%) | 94% |
| Cos φ max. | 0.1 – 1 up to 2000 VA |
| Detection of the load | Adjustable: 1 to 20 W |
| Short-circuit current AC 2 sec. | 30 Aac (60 Aac*) |
| Output voltage | Sine wave 230 Vac (120 Vac*) ±5 % |
| Frequency | 50 Hz (60 Hz*) ± 0.05 % (crystal controlled) |
| Consumption Stand-by / ON no load | 1.2 W/ 16 W |
| Reverse polarity protection as internal fuse | 150 A |
General data
| Weight | 18 kg |
| Dimensions h/w/l [mm] | 273/399/117 mm |
| Conformity | low voltage directive (LVD) 2014/35/EU: EN/IEC 62109-1, 62109-2, 62477-1, electromagnetic compliance (EMC) directive 2014/30/EU: EN/IEC 61000-3-3, 61000-6-2, 61000-6-4, 62040-2 |
Ingress protection of enclosures IP30 | Operating temperature range -20 to 50°C | Relative humidity 95 % (non condensing) | Ventilation forced from 45°C ± 5°C | Length cables (battery/AC out) 1.2 m / 1 m | Acoustic level < 45 dB (with ventilation) | Approximate correction of Pnom -1.5% / °C from + 25°C | Recommended battery capacity > 5 x Pnom/Unom (recommended value in Ah)
Options
| Solar regulator | Voltage max. 45 Vdc |
| Current max. 30 Adc | |
| Principle: Floating 3 stages (I/U/UO) | |
| Absorption voltage: 28.8 Vdc | |
| Floating voltage: 27.2 Vdc | |
| Input for the remote control jt8 (jt8 not included) | ✔ |
In case of technical data change, this bloc below needs to update, it is use for pc and tablets display of technical data
Inverter
| Nominal battery voltage (Input range) | 12 Vdc (10.5 – 16 Vdc) |
| Power 30 min. 25°C | 2100 VA |
| Continuous power 25°C | 2000 VA |
| Power 5 min. 25°C | 2450 VA |
| Power 5 sec. 25°C | 5000 VA |
| Asymmetric load | 1000 VA |
| Max. efficiency (%) | 92% |
| Cos φ max. | 0.1 – 1 up to 2000 VA |
| Detection of the load | Adjustable: 1 to 20 W |
| Short-circuit current AC 2 sec. | 26 Aac (52 Aac*) |
| Output voltage | Sine wave 230 Vac (120 Vac*) ±5 % |
| Frequency | 50 Hz (60 Hz*) ± 0.05 % (crystal controlled) |
| Consumption Stand-by / ON no load | 0.7 W/ 16 W |
| Reverse polarity protection as internal fuse | Not protected |
General data
| Weight | 19 kg |
| Dimensions h/w/l [mm] | 273/399/117 mm |
| Conformity | low voltage directive (LVD) 2014/35/EU: EN/IEC 62109-1, 62109-2, 62477-1, electromagnetic compliance (EMC) directive 2014/30/EU: EN/IEC 61000-3-3, 61000-6-2, 61000-6-4, 62040-2 |
Ingress protection of enclosures IP30 | Operating temperature range -20 to 50°C | Relative humidity 95 % (non condensing) | Ventilation forced from 45°C ± 5°C | Length cables (battery/AC out) 1.2 m / 1 m | Acoustic level < 45 dB (with ventilation) | Approximate correction of Pnom -1.5% / °C from + 25°C | Recommended battery capacity > 5 x Pnom/Unom (recommended value in Ah)
Options
| Solar regulator | Voltage max. 25 Vdc |
| Current max. 30 Adc | |
| Principle: Floating 3 stages (I/U/UO) | |
| Absorption voltage: 14.4 Vdc | |
| Floating voltage: 13.6 Vdc | |
| Input for the remote control jt8 (jt8 not included) | ✔ |
Inverter
| Nominal battery voltage (Input range) | 24 Vdc (21 – 32 Vdc) |
| Power 30 min. 25°C | 2400 VA |
| Continuous power 25°C | 2000 VA |
| Power 5 min. 25°C | 2800 VA |
| Power 5 sec. 25°C | 5200 VA |
| Asymmetric load | 1200 VA |
| Max. efficiency (%) | 94% |
| Cos φ max. | 0.1 – 1 up to 2000 VA |
| Detection of the load | Adjustable: 1 to 20 W |
| Short-circuit current AC 2 sec. | 30 Aac (60 Aac*) |
| Output voltage | Sine wave 230 Vac (120 Vac*) ±5 % |
| Frequency | 50 Hz (60 Hz*) ± 0.05 % (crystal controlled) |
| Consumption Stand-by / ON no load | 1.2 W/ 16 W |
| Reverse polarity protection as internal fuse | 150 A |
General data
| Weight | 18 kg |
| Dimensions h/w/l [mm] | 273/399/117 mm |
| Conformity | low voltage directive (LVD) 2014/35/EU: EN/IEC 62109-1, 62109-2, 62477-1, electromagnetic compliance (EMC) directive 2014/30/EU: EN/IEC 61000-3-3, 61000-6-2, 61000-6-4, 62040-2 |
Ingress protection of enclosures IP30 | Operating temperature range -20 to 50°C | Relative humidity 95 % (non condensing) | Ventilation forced from 45°C ± 5°C | Length cables (battery/AC out) 1.2 m / 1 m | Acoustic level < 45 dB (with ventilation) | Approximate correction of Pnom -1.5% / °C from + 25°C | Recommended battery capacity > 5 x Pnom/Unom (recommended value in Ah)
Options
| Solar regulator | Voltage max. 45 Vdc |
| Current max. 30 Adc | |
| Principle: Floating 3 stages (I/U/UO) | |
| Absorption voltage: 28.8 Vdc | |
| Floating voltage: 27.2 Vdc | |
| Input for the remote control jt8 (jt8 not included) | ✔ |